MemberHell O my friends here we make our tips for create a good and solid bass sound, since i play on this nice place i receive good feedback about my bass growl ;)
For my tracks i use a Line 6 ux2 external card and for my tracks i use a basic compressor from podfarm. I plug a Tech21 Bass driver di 2 generaly or a Tech21 VT Bass II and with my precidion bass sometimes Tech21 comptortion.
Setings on active basse:
Sound balanced at 60% on treble pick up
Bass center position.
Treble center position.
Midle at 10 o clock.
Passive bass :
Totality at 50%
Bass Driver
Level center
Blend center or 1 o clock
Bass center
Treble 11 o clock
Drive center or 2 o clock
Presence 3 or 2 o clock
VT Bass II with cab sims
Level center
Midle 10 o clock
Character 11 o clock
Drive 2 o clock
Low center
Treble 11 o clock
Comptortion
Level 1 o clock
Tone 1 o clock
Tortion 9 or 11 o clock or 7 for clean boost
Compression 9 o clock
and i use i play with plectrum a dunlop Jazztone 207. .
Hope this thread can help you friends. :)
Edited by Evilvince on November 15 2014 01:11
For my tracks i use a Line 6 ux2 external card and for my tracks i use a basic compressor from podfarm. I plug a Tech21 Bass driver di 2 generaly or a Tech21 VT Bass II and with my precidion bass sometimes Tech21 comptortion.
Setings on active basse:
Sound balanced at 60% on treble pick up
Bass center position.
Treble center position.
Midle at 10 o clock.
Passive bass :
Totality at 50%
Bass Driver
Level center
Blend center or 1 o clock
Bass center
Treble 11 o clock
Drive center or 2 o clock
Presence 3 or 2 o clock
VT Bass II with cab sims
Level center
Midle 10 o clock
Character 11 o clock
Drive 2 o clock
Low center
Treble 11 o clock
Comptortion
Level 1 o clock
Tone 1 o clock
Tortion 9 or 11 o clock or 7 for clean boost
Compression 9 o clock
and i use i play with plectrum a dunlop Jazztone 207. .
Hope this thread can help you friends. :)
Edited by Evilvince on November 15 2014 01:11
If you read French ;)
http://forum.onlybass.com/
http://forum.onlybass.com/
